FPV Troubleshooting Tips
how to troubleshoot and resolve fpv drone issues.
If you cannot bind your controller to the receiver in the drone, first thing to check is to make sure that the proper receiver is installed in the drone. If...
Tue, 17 Aug, 2021 at 12:10 PM
There are several sources that can cause your drone to not recognise or communicate with the controller once it is bound properly to the receiver. ...
Mon, 16 Aug, 2021 at 4:28 PM
The most common reasons for this is one of 3 things, 1st, channel mapping for your transmitter. Your transmitter neeeds to match the stick inputs in betafli...
Mon, 16 Aug, 2021 at 4:29 PM
When you power up your drone, you should hear 2 sets of tones. The first 3 beeps is to indicate the esc and motors are getting power. The 2nd set of tones i...
Mon, 16 Aug, 2021 at 4:32 PM
In order to update the fc firmware, you need to put it into whats called dfu or bootloader mode. This allows you to access the processor directly and load n...
Mon, 16 Aug, 2021 at 4:36 PM
Attached below is the cli dump for the TH3. Anytime you update firmware or need to reflash/reset the default Emax settings you will need to enter this into ...
Tue, 30 Nov, 2021 at 4:35 PM